After building the micro shop and due to COVID-19 had to place wood working into pause. Now I have dedicated some space as workshop and started again.
I’m building a farmhouse table using this as guide. Started by building the base with 2×4 and 4×4 pressure treated pine. Did a pre-stain with Minwax Dark Walnut.
The pocket holes on the 2×4 on the base top didn’t worked, the angle made the 2×4 “slide” on top of the 4×4. Fixed it with 3″ inch deck screws from the outer side with a deep counter sink to hide them a bit.
Now I’m working on the table top by joining 2×6 and tying them up with 2×8.
My wife finished the base of the table with Minwax Polycrylic matte.
That’s it for now. The next steps are to do a stain touch up to the top, and finish it with an Epoxy glaze.
Digital Timber 